Sheartak Spiral Cutter head for Toolex TW-8J 8" Jointer with 40 Carbide Inserts
Woodworkers are currently upgrading their older planers and jointers by installing spiral cutter heads, yielding a host of benefits:
Enhanced Surface Quality: With each knife positioned at a slight angle, the spiral cutter head delivers a shear cut, resulting in a smoother finish without any tear-out. Its staggered cutting pattern outperforms traditional straight cuts, especially on intricate hardwoods, leaving behind a lustrous surface.
Reduced Noise: The spiral cutter head's staggered knife arrangement significantly diminishes noise during operation.
Extended Lifespan: Utilizing sintered tungsten carbide inserts measuring 15x15x2.5mm, the spiral cutter head boasts over ten times the longevity of high-speed steel alternatives. Each insert features four edges, ensuring prolonged usage.
Effortless Maintenance: Precision-ground knives, accurate to within +/-0.0004" or +/-0.01mm, are easily interchangeable. With a simple loosening of screws, rotation by 90° for a fresh edge, and fastening, inserts can be replaced within minutes.
Improved Dust Management: Thinner and shorter chips generated by the spiral cutter head facilitate easier dust extraction.
Cost-Effectiveness: The efficiency of spiral cutter heads in producing a polished surface reduces or eliminates the need for extensive sanding, eliminating sharpening requirements. As a result, the investment pays for itself in a remarkably short timeframe.
Kit includes:
(1) All carbide inserts installed.
(5) inserts
(5) Torx screws
(1) T-handle wrench
Ask Question About Product
| Technical | |
| Material of Cutterblock | Alloy Steel |
| No. of Spirals | 5 |
| No. of Carbide Inserts | 40 |
| Carbide Insert Size | 15x15x2.5mm R150 30° |
| Screw Size | T25 10#-32TPI |
| Standard Kit | |
| No. of Additional Knives | 5 |
| No. of Additional Screws | 5 |
| No. of Wrenches | 1 |
| No. of Bearings | 2 |
