Upgrade your Makita KP310 12-1/4" Planer with the Sheartak spiral cutterhead, equipped with 40 carbide knives, and unlock a host of benefits:
Experience a smoother finish with zero tear-out: Each knife is positioned at a slight angle, enabling a shear cut. The spiral cutter head employs a staggered cutting pattern, far superior to a single straight cut. This combined shear and staggered cut minimizes tear-out, leaving behind a glossy surface even on highly figured hardwood.
Drastically reduce noise: The staggered cutting action of the spiral cutter head significantly reduces noise levels.
Enjoy extended tool life: The 15x15x2.5mm inserts, crafted from sintered tungsten carbide, outlast high-speed steel by over ten times. With four edges per insert, longevity is maximized.
Effortless knife replacement: Precision-ground knives, with a tolerance of +/-0.0004" or +/-0.01mm, are easily interchangeable. Simply loosen the screw, rotate 90° for a fresh edge, and secure the insert in minutes.
Simplified dust extraction: Thinner and shorter chips are produced by the spiral cutter head, making dust extraction more efficient.
Cost-effective operation: Spiral cutter heads deliver a superior finish, minimizing or eliminating the need for sanding. With no sharpening required, the investment pays for itself in a short time.
Specifications
Material of Cutterblock: AISI 5140 high tensile strength alloy steel
Material of insert: Grade C3++.
Carbide insert size: 15x15x2.5mm R150
Wrench size: Torx head T type
Kit Includes:
* 40 carbide inserts installed.
* 5 extra carbide inserts
* 5 extra Torx screws
* 1 T-handle wrench
Ask Question About Product
Technical | |
Material of Cutterblock | Alloy Steel |
No. of Spirals | 4 |
No. of Carbide Inserts | 40pcs |
Carbide Insert Size | 15x15x2.5mm R150 30° |
Screw Size | T25 10#-32TPI |
Standard Kit | |
No. of Additional Knives | 5 |
No. of Additional Screws | 5 |
No. of Wrenches | 1 |
No. of Bearings | 2 |