V-spiral Cutterhead, helical Cutterhead for King Canada KC-13HPC 13" Portable Planer.
The symmetrical grooves make the board feeding centered and straight.
39 Indexable carbide inserts are installed on 4 V shape spirals. Each insert has four sharp round edges.
The inserts are slightly angled to the feeding of the board, which generates a shearing action, as opposed to the direct and straight helical cutterheads. Shearing cut leaves a much smoother finish and makes much less noise.
The V shape directs board feeding straight forward. It helps eject chips forward other than to one side, which makes dust extraction better.
Our cutterheads are warranted for one year from the date of purchase, (Carbide inserts are consumables and not under warranty.)
The Carbide Insert size is 15x15x2.5mm R150, screw size is 10#-32TPI Torx headed. T wrench is standard T25. These parts can be easily found online or shipped from our warehouse.
Kits include:
* High tensile strength alloy steel cutterhead block
* 39 Carbide Inserts installed on 4 V-spirals
* 5 carbide inserts, 5 screws, and 1 T-type wrench
* A pair of Japan-made sealed bearings.
Why Sheartak Spiral Cutterhead?
Descriptions | Original Cutterhead | Sheartak Spiral Cutterhead |
---|---|---|
No. of Inserts | 26 | 39 |
Edges of Inserts | 2 | 4 |
Materials of Inserts | HSS | Carbide |
Insert Size | 14.3x14.3x2mm | 15x15x2.5mm R150 |
Cutting | Direct | Shearcut |
Ask Question About Product
Technical | |
Material of Cutterblock | Alloy Steel |
No. of Spirals | 4 |
No. of Carbide Inserts | 39 |
Carbide Insert Size | 15x15x2.5mm R150 30° |
Screw Size | T25 10#-32TPI |
Standard Kit | |
No. of Additional Knives | 5 |
No. of Additional Screws | 5 |
No. of Wrenches | 1 |