Spiral Cutterhead for Makita DKP180Z 3-1/4-Inch Cordless Planer with 14 carbide knives
Woodworkers are now retrofitting spiral cutter heads to their old planers, and jointers for the following advantages.
* Smoother Finish with no tear-out. Each knife sits at a slight angle and it produces a shear cut. Spiral cutter head planes board in a staggered cut which is much better than a single straight cut. The combined shear and staggered cut eliminates tear-out and leaves a glossy surface finish on even highly figured hardwood.
* Noise is hugely reduced as the spiral cutter head allows a few knives to cut in a staggered way.
* More than 10 times the life use of high-speed steel. The 15x15x2.5mm inserts are made of sintered tungsten carbide which is much harder than high-speed steel. Each insert has four edges.
* Easy to change. The knives are precision ground to a tolerance of +/-0.0004" or +/-0.01mm and are interchangeable. Loosen the screw, rotate 90° for a new edge, and tighten the insert in minutes.
* Dust extraction is easier. The spiral cutter head produces thinner and shorter chips.
* Low cost to use. Spiral cutter heads produce a smooth finish, reduce or eliminate sanding work, don't require sharpening, the product will pay for itself in a very short time.
-
Bryan wheeler: Will this fit a Makita xpk01 battery planer?2024-01-12 00:50:27
-
Answer: Hello Bryan, the link below will directs you to the right cutterhead: https://www.sheartak.com/spiral-cutterhead-makita-lxpk01-planer?search=S012012024-03-22 22:11:02
-
Toby Goyder-Shanks: Does this fit the new 18v brushless Makita planer?2023-11-24 03:32:41
-
Answer: Hello Toby, Could you please provide the model number of your Makita planer? You can send us an email at sales@sheartak.com. Thank you.2024-03-22 22:17:48
Ask Question About Product
Technical | |
Material of Cutterblock | Alloy Steel |
No. of Spirals | 4 |
No. of Carbide Inserts | 14PCS |
Carbide Insert Size | 15x15x2.5mm R150 30° |
Screw Size | T25 10#-32TPI |
Standard Kit | |
No. of Additional Knives | 5 |
No. of Additional Screws | 5 |
No. of Wrenches | 1 |
No. of Bearings | 2 |