V-spiral Cutterhead, helical Cutterhead for TP13002 13" Thickness Planer.
The symmetrical grooves make the board feed centered and straight.
39 Indexable carbide inserts are installed on 4 V shape spirals. Each insert has four sharp round edges.
The inserts are slightly angled to the feeding of the board, which generates a shearing action, as opposed to the direct and straight helical cutterheads. Shearing cut leaves much smoother finish and makes much less noise.
The V shape directs board feeding straight forward. It helps eject chips forward other than to one side, which makes dust extraction better.
Our cutterheads are warranted for one year from date of purchase, (Carbide inserts are consumables and not under warranty.)
Carbide Insert size is 15x15x2.5mm R150, screw size is 10#-32TPI Torx headed. T wrench is standard T25. These parts can be easily found on online or can be shipped from our warehouse.
Kits includes:
* High tensile strength alloy steel cutterhead block
* 39 Carbide Inserts installed on 4 V-spirals
* 5 carbide inserts, 5 screws and 1 T type wrench
* A pair of Japan made sealed bearings.
Ask Question About Product
Technical | |
Material of Cutterblock | Alloy Steel |
No. of Spirals | 4 |
No. of Carbide Inserts | 39 |
Carbide Insert Size | 15x15x2.5mm R150 30° |
Screw Size | T25 10#-32TPI |
Standard Kit | |
No. of Additional Knives | 5 |
No. of Additional Screws | 5 |
No. of Wrenches | 1 |