Transform your Makita 2012NB 12" Planer with spiral cutterheads to reap the following benefits:
* Achieve an unparalleled level of finish quality without any unsightly tear-out. The inserts are cleverly angled along the helix in a staggered pattern, resulting in a smooth shear-cut effect even on highly figured hardwood.
* Reduce noise levels drastically thanks to the spiral cutter head's limited contact with the board and minimal knives.
* Enjoy the durability of solid tungsten carbide cutters, which are far tougher and retain sharpness for longer than high-speed steel blades. With four cutting edges on each insert, you can easily rotate a chipped or dull edge 90° for a new, sharp cutting edge.
* Set up your planer with ease, as the indexable carbide inserts are interchangeably precise and ground to tight tolerances. You can swap them out in just minutes by loosening the screws, rotating the inserts 90°, and then securing them with the taper hole locking system.
* Dust extraction is made easier by the smaller carbide inserts, which remove thinner and shorter materials.
* Over time, the use of spiral cutter heads proves to be more cost-effective, with the initial investment paying for itself in a short period.
Spiral Cutterhead Kit includes:
* High tensile strength alloy steel cutter block.
* 40 carbide inserts installed.
* A pair of sealed bearings.
* 5 extra carbide inserts & 5 extra screws free as spare parts.
* 1 Wrench
Ask Question About Product
Technical | |
Material of Cutterblock | Alloy Steel |
No. of Spirals | 4 |
No. of Carbide Inserts | 40pcs |
Carbide Insert Size | 15x15x2.5mm R150 30° |
Screw Size | T25 10#-32TPI |
Standard Kit | |
No. of Additional Knives | 5 |
No. of Additional Screws | 5 |
No. of Wrenches | 1 |
No. of Bearings | 2 |