Spiral Cutterhead for Linmac 12'' Jointer LCM-002 with 80 Carbide Inserts
Woodworkers are increasingly opting to retrofit spiral cutterheads onto their existing planers and jointers to capitalize on a multitude of benefits:
Achieve a flawlessly smooth finish with zero tear-out. Each knife is meticulously angled to deliver a shear cut, while the staggered arrangement of the spiral cutterhead ensures superior performance compared to traditional straight cuts. This combined shear and staggered cut technique eliminates tear-out, leaving a lustrous surface finish even on highly figured hardwoods.
Experience a significant reduction in noise levels as the spiral cutterhead enables a staggered cutting action with fewer knives in operation.
Enjoy a lifespan over 10 times longer than high-speed steel. Crafted from sintered tungsten carbide, the 15x15x2.5mm inserts boast exceptional hardness, with each insert featuring four edges for prolonged use.
Simplify maintenance with ease. The precision-ground knives, accurate to within +/-0.0004" or +/-0.01mm, are effortlessly interchangeable. Loosen the screw, rotate 90° for a fresh edge, and tighten the insert within minutes.
Enhance dust extraction efficiency with the spiral cutterhead producing thinner, shorter chips.
Realize cost-effectiveness in operations. Spiral cutterheads not only deliver a smoother finish, reducing or eliminating the need for sanding, but also eliminate the requirement for sharpening, ensuring rapid return on investment.
Kit Includes:
* 80 carbide inserts installed.
* 5 extra carbide inserts
* 5 extra Torx screws
* 1 T-handle wrench
Ask Question About Product
Technical | |
Material of Cutterblock | Alloy Steel |
No. of Spirals | 6 |
No. of Carbide Inserts | 80 |
Carbide Insert Size | 15x15x2.5mm R150 30° |
Screw Size | T25 10#-32TPI |
Standard Kit | |
No. of Additional Knives | 5 |
No. of Additional Screws | 5 |
No. of Wrenches | 1 |