Sheartak Spiral Cutter head designed for the King Canada NCT-381 15" Planer, is equipped with a total of 80 carbide inserts distributed across 5 spirals. As an added value, we provide 5 extra carbide inserts and 5 screws as spare parts for your convenience.
This cutter head features two premium sealed bearings manufactured by NSK in Japan. The pulley-side bearing comes pre-installed on the shaft, while the idle-end bearing is included separately and must be mounted when placing this end into the gearbox. Additionally, a new TC-type oil seal is included to prevent any oil leakage from the gearbox.
We offer shipping via Canada Post, USPS, and UPS for your flexibility and convenience.
Each carbide insert on our Sheartak Spiral Cutter head is designed to bear an equal kickback force and share an equivalent amount of material removal. With 80 carbide inserts on this 15" planer, our cutter head outperforms competitors, some of which install only 75 inserts on 5 spirals or even 68 inserts on 4 spirals. For enhanced productivity and value, choose Sheartak. Contact us at our Toll-Free number 1-877-41-SHEAR (1-877-417-4327) for further information.
The Sheartak spiral cutter head delivers a superior surface finish compared to straight-edge cutter heads. The round-edged inserts are angled for a shear-cut, providing a smooth, glassy finish even on highly figured or very soft woods. Each insert boasts four cutting edges and can be rotated up to 3 times to reveal a fresh, sharp edge, eliminating the need for frequent sharpening and resetting. Carbide inserts maintain their sharpness 50 times longer than HSS blades. Furthermore, the Sheartak spiral cutter head produces shorter and thinner chips, making dust extraction significantly easier.
Rest assured, all our cutter heads are backed by a one-year warranty from the date of purchase, covering parts and ensuring they are free from manufacturer defects (consumables excluded). Choose Sheartak for lasting performance and reliability in your planing tasks.
Specifications:
Material of Cutterblock: AISI 5140 high tensile strength alloy steel
Material of insert: Grade C3++.
Carbide insert size: 15x15x2.5mm
Number of inserts: 80
Number of rows: 5
Wrench size: Torx head T25
Screw size: 10#-32TPI
Kit include:
(1) set of bearings
(1) Oil seal
(1) T-25 T-handle wrench
(5) additional inserts
(5) 5 Torx screws
Ask Question About Product
| Technical | |
| Material of Cutterblock | Alloy Steel |
| No. of Spirals | 6 |
| No. of Carbide Inserts | 80 |
| Carbide Insert Size | 15x15x2.5mm R150 30° |
| Screw Size | T25 10#-32TPI |
| Standard Kit | |
| No. of Additional Knives | 5 |
| No. of Additional Screws | 5 |
| No. of Wrenches | 1 |
