Upgrade your DeWalt DW733QS 12.5" Thickness Planer by switching to spiral cutterheads for a variety of benefits.
Here are some advantages you can expect:
- Achieve a higher quality finish without any tear-out. The inserts on the cutterhead are angled along the helix in a staggered way, allowing for shear-cut effects on even the most complex hardwood.
- Enjoy a significant reduction in noise as the spiral cutterhead maintains constant contact with the board with only a few knives.
- Benefit from solid tungsten carbide cutters that are much harder and stay sharper for longer than high-speed steel blades. If one edge is chipped or dull, simply rotate it 90° for a fresh, sharp edge. Each insert has four cutting edges and can be used four times.
- Experience an easy setup process. The indexable carbide inserts are precisely ground to a tight tolerance and can be interchanged. Loosen the screws, rotate 90°, and tighten the inserts in minutes. The inserts can be accurately positioned using the taper hole-style locking.
- Remove shorter and thinner materials with smaller carbide inserts, making dust extraction much easier.
- Save money in the long term as spiral cutterheads are cheaper to use and can pay for themselves in a short amount of time.
The Spiral Cutterhead Kit includes:
- A high-tensile-strength alloy steel cutter block.
- 40 carbide inserts for installation.
- A pair of Japan-sealed bearings.
- 5 extra carbide inserts and screws as spare parts.
- 1 wrench.
Ask Question About Product
Note: HTML is not translated!
Technical | |
Material of Cutterblock | Alloy Steel |
No. of Spirals | 4 |
No. of Carbide Inserts | 40pcs |
Carbide Insert Size | 15x15x2.5mm R150 30° |
Screw Size | T25 10#-32TPI |
Standard Kit | |
No. of Additional Knives | 5 |
No. of Additional Screws | 5 |
No. of Wrenches | 1 |
No. of Bearings | 2 |