Spiral Cutter Head for Wood-Mizer MP360 Planer Moulder with 72 Carbide Inserts

CAD$1,369.00 Price drop reminder
  • Brand: Sheartak
  • Product Code: S00962
  • Availability: In Stock

- +
Total CAD$1,369.00

Spiral Cutter Head for Wood-Mizer MP360 Planer Molder with 72 Carbide Inserts 

Woodworkers are now experiencing the benefits of retrofitting spiral cutterheads to their old planers and jointers, including:

  • A smoother finish with no tear-out. Each knife sits at a slight angle, producing a shear-cut that planes boards in a staggered way, resulting in a much better surface finish than a single straight cut. The combined shear and staggered cut eliminates tear-out and leaves a glossy surface finish even on highly figured hardwoods.
  • Dramatically reduced noise as the spiral cutterhead allows a few knives to cut in a staggered way.
  • A longer lifespan, with over 10 times the use of high-speed steel. The 15x15x2.5mm inserts are made of sintered tungsten carbide, which is much harder than high-speed steel, and each insert has four edges.
  • Ease of use, with precision ground knives interchangeable to a tolerance of +/-0.0004" or +/-0.01mm. Simply loosen the screw, rotate 90° for a new edge, and tighten the insert in minutes.
  • Easier dust extraction, as the spiral cutterhead produces thinner and shorter chips.
  • Low cost to use. Spiral cutterheads produce a smoother finish, reduce or eliminate sanding work, and don't require sharpening, so your product will pay for itself in a very short time.

Specifications:

  • Material of Cutterblock: AISI 5140 high tensile strength alloy steel
  • Material of insert: Grade C3++ or K10
  • Carbide insert size: 15x15x2.5mm R150
  • Number of inserts: 72
  • Number of rows: 4
  • Wrench size: Torx head T type

The kit includes:

  • 72 carbide inserts to be installed
  • 5 extra carbide inserts
  • 5 extra Torx screws
  • 1 T-handle wrench

窗体顶端

 

 

 

Ask Question About Product

Note: HTML is not translated!
Technical
Material of CutterblockAlloy Steel
No. of Spirals4
No. of Carbide Inserts72
Carbide Insert Size15x15x2.5mm R150 30°
Screw SizeT25 10#-32UNC
Standard Kit
No. of Additional Knives5
No. of Additional Screws5
No. of Wrenches1
  • All(0)
  • Good(0)
  • Fair(0)
  • Poor(0)
  • Image(0)
Note: HTML is not translated!
    Bad           Good
If the price of the product is reduced within 30 days, we will notify you via email, SMS and mobile client~
Notify you when the item is below the price
Mobile phone number
Email address
If the goods arrive within 30 days, we will notify you via email, SMS and mobile client~
Mobile phone number
Email address
Checkin successfully
Get bonus points:
My Points
Signed in Day
Checkin Record
Time Points Detailed description