Upgrade your machine with Sheartak spiral cutterheads and experience these benefits:
- Achieve a superior quality finish without any tear-out. The inserts are arranged in a staggered helical pattern and produce shear-cut effects on even highly figured hardwoods.
- Enjoy a quieter cutting experience as the spiral cutterhead maintains constant contact with the board using only a few knives.
- Utilize solid tungsten carbide cutters, which are much harder and retain sharpness for longer periods compared to high-speed steel blades. If one edge becomes dull or chipped, simply rotate it 90° for a fresh edge. Each insert has four cutting edges and can be used four times.
- Easily set up the cutterheads using indexable carbide inserts that are interchangeable and precision-ground to a tight tolerance. In just minutes, you can loosen the screws, rotate the inserts 90°, and securely tighten them in place using the taper hole style locking system.
- Improve dust extraction by using smaller carbide inserts that can remove shorter and thinner materials.
- In the long run, spiral cutterheads are a more cost-effective option and can quickly pay for themselves.
Spiral Cutterhead Kit includes:
* High tensile strength alloy steel cutter block.
* 156 carbide inserts are installed.
* 5 extra carbide inserts & 5 extra screws free as spare parts.
* 1 Wrench
Ask Question About Product
Note: HTML is not translated!
Technical | |
Material of Cutterblock | Alloy Steel |
No. of Spirals | 6 |
No. of Carbide Inserts | 156 |
Carbide Insert Size | 15x15x2.5mm R150 30° |
Screw Size | M6X1 |
Standard Kit | |
No. of Additional Knives | 5 |
No. of Additional Screws | 5 |
No. of Wrenches | 1 |