Upgrade your Craftsman 113.20682C 6 1/6” jointer with a Sheartak spiral cutterhead. This advanced tool has 30 carbide inserts on 5 spirals, each with 4 indexable edges. The carbide inserts are angled to the board feeding, which generates a shear cut, eliminates tear-out, and leaves a glossy surface finish on all types of wood and man-made board.
Not only does this cutterhead reduce operation noise, but it also minimizes downtime. Simply rotate the edge 90 degrees if it's dull or chipped, and you'll have a fresh, sharp edge. You don't need to sharpen the inserts or discard them until all four edges are affected. Sheartak spiral cutter heads remove short chips in a staggered way and avoid dust clog at the hood port, significantly improving dust extraction. With this tool, you can reduce three-quarters of your sanding work and consume less power. Plus, the investment can pay back quickly due to its efficiency and effectiveness.
The Sheartak spiral cutter head comes in a kit that includes a high tensile strength alloy steel cutter block, 30 carbide inserts installed, 5 extra carbide inserts, 5 extra screws, and 2 set crews. It also comes with a 1-year warranty for the cutter block.
Spiral Cutterhead Kit includes:
* High tensile strength alloy steel cutter block.
* 30 carbide inserts are installed.
* 5 extra carbide inserts & 5 extra screws free as spare parts.
* 1 Wrench
Ask Question About Product
Technical | |
Material of Cutterblock | Alloy Steel |
No. of Spirals | 5 |
No. of Carbide Inserts | 30 |
Carbide Insert Size | 15x15x2.5mm R150 30° |
Screw Size | T25 10#-32TPI |
Standard Kit | |
No. of Additional Knives | 5 |
No. of Additional Screws | 5 |
No. of Wrenches | 1 |