Sheartak Spiral Cutter head for Polamco DSMC-63 24" PLANER with 243 Carbide Inserts
Achieve a seamless finish with no more tear-out. The slight angle of each knife produces a shear-cut, while the spiral cutterhead planes the board in a staggered pattern for an improved result. This combination eliminates tear-out and results in a smooth, glossy surface even on figured hardwood.
Experience reduced noise as multiple knives work together in a staggered pattern thanks to the spiral cutterhead design.
Get more than 10 times the lifespan of traditional high-speed steel. The 15x15x2.5mm inserts are made of sintered tungsten carbide, which is much harder and more durable. Each insert has four usable edges.
Changing the knives is easy. They are precision ground to a tolerance of +/-0.0004" or +/-0.01mm and can be interchanged quickly. Simply loosen the screw, rotate 90° for a fresh edge, and tighten the insert in minutes.
Improved dust extraction with the spiral cutterhead producing thinner and shorter chips.
Save costs with a smoother finish that reduces or eliminates sanding work and doesn't require sharpening. The investment will pay for itself in a short amount of time.
The Sheartak Cutterhead Kit includes:
A high tensile strength alloy steel cutter block.
243 carbide inserts pre-installed on 9 spirals.
5 extra carbide inserts and 5 extra screws as spare parts.
Ask Question About Product
| Technical | |
| Material of Cutterblock | Alloy Steel |
| No. of Spirals | 10 |
| No. of Carbide Inserts | 243 |
| Carbide Insert Size | 15x15x2.5mm R150 30° |
| Screw Size | T20 M6x1 |
| Standard Kit | |
| No. of Additional Knives | 5 |
| No. of Additional Screws | 5 |
| No. of Wrenches | 1 |
