Spiral Cutterhead for Hitachi F1000A Electric Planer Jointer with 40 Carbide Inserts
Woodworkers are now upgrading their old planers and jointers with spiral cutter heads to experience the following benefits:
* Smoother Finish: The angled positioning of each knife creates a shear cut and the spiral design eliminates tear-out for a glossy surface on even hardwoods.
* Reduced Noise: The spiral design allows for a few knives to cut in a staggered manner, resulting in significantly reduced noise.
* Increased Durability: The sintered tungsten carbide inserts have a lifespan over 10 times longer than high-speed steel.
* Easy Knife Replacement: The precision-ground knives can be easily switched out in minutes, with four usable edges per insert.
* Improved Dust Extraction: The spiral design produces thinner and shorter chips, making dust extraction easier.
* Cost-Effective: The smooth finish and reduced sanding requirements will quickly pay for the cost of the spiral cutter head.
Installation of the carbide inserts into the cutter block takes about 30 minutes, but once installed, the spiral cutter head can handle the same thickness as the original HSS blade cutter head.
For more information and tutorials, please visit:
http://www.sheartak.com/shearcut.pdf
http://sheartak.com/video/spiralcutterhead.mp4
* 40 carbide inserts to be installed.
* A pair of premium sealed bearings
* 5 extra carbide inserts
* 5 extra Torx screws
* 1 T-handle wrench
Ask Question About Product
Technical | |
Material of Cutterblock | Alloy Steel |
No. of Spirals | 4 |
No. of Carbide Inserts | 40pcs |
Carbide Insert Size | 15x15x2.5mm R150 30° |
Screw Size | T25 10#-32TPI |
Standard Kit | |
No. of Additional Knives | 5 |
No. of Additional Screws | 5 |
No. of Wrenches | 1 |