Spiral Cutterhead for Durden T1400 370mm Thickness Planer

CAD$1,619.00 Price drop reminder
  • Brand: Sheartak
  • Product Code: S01309
  • Availability: In Stock
  • Promotion:
    Full reduction Up to CAD$300.00 discount 8%

- +
Total CAD$1,619.00

Spiral Cutterhead for Durden T1400 370mm Thickness Planer is equipped with 80 carbide inserts along 5 spirals. Each insert has four R150 round edges. The inserts are seated at a slight angle to the boarding feed, which generates true shear-cut, eliminates tear-out, and leaves a glossy surface finish on any wood, to or against the grain of boards.

 

Durden had two versions of T1400. The overall length of this one is 595mm. The overall length of another version is 565mm. 

 

Each carbide insert shares the same amount of wood. On the same cutting materials, cutting parameters, life span of carbide inserts on more-insert cutterhead is longer than on fewer-insert cutterheads. This cutterhead features 90 carbide inserts on 6 rows. It’s more productive and value effective.  Call us at our Toll-Free number 187741-SHEAR (18774174327) for more information. 

 

As the carbide inserts cut at a small portion of the 15mm length in a staggered way different from the direct strike of a conventional long straight blade, noise is hugely reduced during option. When one edge is dull or chipped, loosen, clean and turn it 90 degrees to reveal a new edge. After tightening it up, there is now a new sharp edge in minutes. Only replace the inserts when four edges are affected. The inexpensive carbide inserts are standard sizes and easy to acquire.

 

Due to the quality cut, sanding work is reduced by three quarters. The life use of carbide inserts is 50 times of the high-speed steel blades. Spiral cutter head consumes less power than cutter heads with HSS blades. These features make retrofitting much cheaper. As the spiral cutter head removes short strips of wood, dust extraction becomes much easier, and clog at the hood fort never happens even if your dust collector is not powerful enough or well designed. Upgrade your planer now and it will pay back your investment in no time. 

 

 

Kit includes:

* High tensile strength alloy steel cutter block.

* 80 carbide inserts installed.

* 5 extra carbide inserts.

* 5 extra screws.

Ask Question About Product

Note: HTML is not translated!
Technical
Material of CutterblockAlloy Steel
No. of Spirals5
No. of Carbide Inserts80
Carbide Insert Size15x15x2.5mm R150 30°
Screw SizeT25 10#-32TPI
Standard Kit
No. of Additional Knives5
No. of Additional Screws5
No. of Wrenches1
  • All(0)
  • Good(0)
  • Fair(0)
  • Poor(0)
  • Image(0)
Note: HTML is not translated!
    Bad           Good

Related Products

If the price of the product is reduced within 30 days, we will notify you via email, SMS and mobile client~
Notify you when the item is below the price
Mobile phone number
Email address
If the goods arrive within 30 days, we will notify you via email, SMS and mobile client~
Mobile phone number
Email address
Checkin successfully
Get bonus points:
My Points
Signed in Day
Checkin Record
Time Points Detailed description