If you have a Craftsman 103.206801 6" Jointer that has been serving you for years and still going strong, consider upgrading it with a Sheartak spiral cutterhead to take it to the next level.
The Sheartak spiral cutterhead comes with 30 carbide inserts on 5 spirals, each of which has 4 indexable edges. With a slight angle to the board feeding, these inserts generate a shear cut that eliminates tear-out and leaves a glossy surface finish on softwood, hardwood, and man-made board. They also greatly reduce operational noise.
When a carbide insert becomes dull or chipped, simply rotate the edge 90 degrees to reveal a new sharp edge. You only need to discard the inexpensive carbide inserts when all four edges are affected, eliminating the need to sharpen them and greatly reducing downtime. Sheartak spiral cutterheads also remove short chips in a staggered way, reducing three-quarters of your sanding work and consuming less power. They also avoid dust clogging at the hood port, significantly improving dust extraction.
Investing in a Sheartak spiral cutterhead can quickly pay back your initial investment while improving the performance of your Craftsman 6" Jointer.
Craftsman 103.206801 6" Jointer Kit includes:
* High tensile strength alloy steel cutter block.
* 30 carbide inserts installed.
* 5 extra carbide inserts.
* 5 extra screws.
* 2 set crews.
* 1-year warranty for cutter block.
Ask Question About Product
| Technical | |
| Material of Cutterblock | Alloy Steel |
| No. of Spirals | 5 |
| No. of Carbide Inserts | 30 |
| Carbide Insert Size | 15x15x2.5mm R150 30° |
| Screw Size | T25 10#-32TPI |
| Standard Kit | |
| No. of Additional Knives | 5 |
| No. of Additional Screws | 5 |
| No. of Wrenches | 1 |
